Patton electronic Network Card 3P MF9 User Manual

USER  
MANUAL  
MODEL 3P-MF and  
3P-MF9  
DB-25 and DB-9  
In-Line Power  
Supply Adapters  
Part# 07M3PMF9 Rev. B  
Doc# 056020U  
SALES OFFICE  
(301) 975-1000  
TECHNICAL SUPPORT  
(301) 975-1007  
Revised 5/29/03  
An ISO-9001  
Certified Company  
 
1.0 WARRANTY INFORMATION  
Patton Electronics warrants all Model 3P-MF Series components to be  
free from defects, and will—at our option—repair or replace the product  
should it fail within one year from the first date of shipment.  
This warranty is limited to defects in workmanship or materials, and does  
not cover customer damage, abuse or unauthorized modification. If this  
product fails or does not perform as warranted, your sole recourse shall  
be repair or replacement as described above. Under no condition shall  
Patton Electronics be liable for any damages incurred by the use of this  
product.These damages include, but are not limited to, the following: lost  
profits, lost savings and incidental or consequential damages arising  
from the use of or inability to use this product. Patton Electronics spe-  
cifically disclaims all other warranties, expressed or implied, and the  
installation or use of this product shall be deemed an acceptance of  
these terms by the user.  
1.1 RADIO AND TV INTERFERENCE  
The Models 3P-MF and 3P-MF9 generate and use radio frequency  
energy, and if not installed and used properly—that is, in strict accor-  
dance with the manufacturer's instructions—may cause interference to  
radio and television reception. The Models 3P-MF and 3P-MF9 have  
been tested and found to comply with the limits for a Class A computing  
device in accordance with the specifications in Subpart J of Part 15 of  
FCC rules, which are designed to provide reasonable protection from  
such interference in a commercial installation. However, there is no guar-  
antee that interference will not occur in a particular installation. If the  
Model 3P-MF or 3P-MF9 do cause interference to radio or television  
reception, which can be determined by turning the power off or discon-  
necting the RS-232 interface, the user is encouraged to try to correct the  
interference by one of the following measures: moving the computing  
equipment away from the receiver, re-orienting the receiving antenna  
and/or plugging the receiving equipment into a different AC outlet (such  
that the computing equipment and receiver are on different branches).  
1.2 CE NOTICE  
The CE symbol on your Patton Electronics equipment indicates that it is  
in compliance with the Electromagnetic Compatibility (EMC) directive  
and the Low Voltage Directive (LVD) of the Union European (EU). A Cer-  
tificate of Compliance is available by contacting Patton Technical Sup-  
port.  
2
 
     
1.3 SERVICE  
All warranty and non-warranty repairs must be returned freight prepaid  
and insured to Patton Electronics. All returns must have a Return Materi-  
als Authorization number on the outside of the shipping container. This  
number may be obtained from Patton Electronics Technical Service at  
Note Packages received without an RMA number will not be  
accepted.  
Patton Electronics’ technical staff is also available to answer any ques-  
tions that might arise concerning the installation or use of your Model 3P-  
MF Series product. Technical Service hours: 8AM to 5PM EST, Monday  
through Friday.  
3
 
 
2.0 GENERAL INFORMATION  
Thank you for your purchase of this Patton Electronics product. This  
product has been thoroughly inspected and tested and is warranted for  
One Year parts and labor. If any questions or problems arise during  
installation or use of this product, please do not hesitate to contact Pat-  
ton Electronics Technical Support at (301) 975-1007.  
2.1 FEATURES  
• Solves low power interface problems  
• Provides power to any Patton self-powered short-range modem  
• Supplies 9 VDC to pin 9 (DB-25 and DB-9)  
• DB-25 male to DB-25 female connectors (Model 3P-MF)  
• DB-9 male to DB-25 female connectors (Model 3P-MF9)  
• LED indicator shows power status  
• 120 or 230 VAC versions available  
• Very thin case (0.7 in./1.8 cm) for closely spaced computer ports  
• Nothing to configure—just plug it in!  
2.2 DESCRIPTION  
The Model 3P-MF Series power supply adapters let you use any Patton  
self powered short haul with an underpowered EIA-232 or EIA-574 inter-  
face. Many laptops, notebooks and PC cards on the market supply inter-  
face that’s well below the specifications of the actual standard. The  
Models 3P-MF (DB-25 connectors) and 3P-MF9 (DB-9 connectors) can  
easily bridge that gap. Special versions also available.  
Model 3P-MF is equipped with DB-25 connectors on each end; Model  
3P-MF9 has DB-9 connectors. Each provides 9VDC to Patton’s interface  
powered short hauls on pin 9. And both 120 VAC and 230 VAC wall-  
mount adapter versions are available.  
4
 
     
3.0 INSTALLATION  
Patton's Model 3P-MF Series are easy to install and should give you  
years of trouble-free service. Here are a few simple instructions to help  
you get things hooked up right. If you have any questions, please contact  
Patton Electronics Technical Support at (301)975-1007.  
1. Disconnect the short haul modem from the low-power EIA-232  
device.  
2. Connect Model 3P-MF/3P-MF9 into the DB-25/DB-9 connector of  
the short haul modem.  
3. Connect the other end of the 3P-MF/3P-MF9 into the EIA-232 device.  
The application should look similar to the diagram in Figure 1.  
Figure 1. Connecting a Model 3P-MF  
4. Plug the wall-adapter into the AC wall jack.  
5. Connect the twisted pair line connection between short haul modems  
as described in the short haul modem user manual (see Figure 2,).  
Figure 2. Powering up a Self-Powered Short Haul Modem with a Model 3P-MF  
5
 
     
APPENDIX A  
PATTON MODEL 3P-MF & 3P-MF9 SPECIFICA  
TIONS  
A.1 TRANSMISSION FORMAT  
Asynchronous  
A.2 ELECTRICAL INTERFACE  
• Model 3P-MF: EIA-232  
• Model 3P-MF9: EIA-574  
A.3 DATA RATE  
Transparent to Data Rate  
A.4 DTE/DCE CONNECTION  
Either a male or female DB-25  
A.5 CONNECTORS  
• Model 3P-MF: DB-25M and DB-25F  
• Model 3P-MF9P: DB-9M and DB-9F  
A.6 POWER SUPPLY  
120 or 230 VAC wall mount adapter supplies 9 VDC  
A.7 MAX. POWER OUTPUT  
+9 VDC ±5% at 100mA (approx 945 mW)  
A.8 SIZE  
• Model 3P-MF9: 2.7 x 1.2 x 0.7 in. (6.9 x 3.0 x 1.8 cm)  
• Model 3P-MF: 2.2 x 2.1 x 0.7 in. (5.6 x 5.3 x 1.8 cm)  
A.9 COMPLIANCE INFORMATION  
• FCC Part 15, Class A  
• UL/CSA (120VDC Wall Mount)  
• EN55022 Class A (Emissions)  
• EN50082-1 (Immunity)  
• 89/336/EEC (Declaration of Conformity—Wall Mount)  
• 73/23/EEC (Declaration of Conformity)  
6
 
   
APPENDIX B  
PATTON MODEL 3P-MF & 3P-MF9 PIN ASSIGNMENTS  
Model 3P-MF DB-25 Interface  
SIGNAL/PIN#  
SIGNAL/PIN#  
Secondary Transmit Data - 14  
Transmit Clock - 15  
1 - (FG) Frame Ground  
2 - (TD) Transmit Data  
Secondary Receive Clock - 16  
Receiver Clock - 17  
3 - (RD) Receive Data  
4 - (RTS) Request to Send  
5 - (CTS) Clear to Send  
6 - (DSR) Data Set Ready  
7 - (SG) Signal Ground  
8 - (CD) Carrier Detect  
9 - (DCV+) DC Test Voltage*  
10 - (DCV-) DC Test Voltage  
11 - Unassigned  
Local Loopback - 18  
Secondary Request to Send - 19  
Data Terminal Ready - 20  
Remote Loopback - 21  
Ring Indicator - 22  
Data Signal Rate Selector - 23  
Transmit Clock - 24  
Test Mode - 25  
12 - Secondary Rcvd Line  
13 - Secondary Clear to Send  
* Note Model 3P-MF applies power to pin 9 (DCV+) only. All other sig-  
nals are passed through unmodified from end-to-end. Signal  
names are provided here to more closely represent the EIA-232  
standard (see Appendix C on page 8).  
Model 3P-MF9 DB-9 Interface  
SIGNAL/PIN#  
SIGNAL/PIN#  
1- (CD) Carrier Detect  
Data Set Ready (DSR) - 6  
Ready to Send (RTS) - 7  
Clear to Send (CTS) - 8  
*DC Test Voltage (DCV+)- 9  
2 - (RD) Receive Data  
3 - (TD) Transmit Data  
4- (DTR) Data Terminal Ready  
5- (SG/FG) Signal Ground/ Frame Ground  
* Note Model 3P-MF9 applies power to pin 9 (DCV+) only. All other sig-  
nals are passed through unmodified from end-to-end. Signal  
names are provided here to more closely represent the EIA-232  
standard (see Appendix C on page 8).  
7
 
 
APPENDIX C  
PATTON MODEL 3P-MF BLOCK DIAGRAM  
8
 
 
APPENDIX C - (CONTINUED)  
PATTON MODEL 3P-MF9 BLOCK DIAGRAM  
Power can be provided through pin 9 (default setting), DSR, or RTS by  
changing jumper settings (see Table 1).  
Table 1: Power Output Strap Selection  
Jumper  
Description  
JP-1  
JP-2  
JP-3  
JP-4  
Connect 9 VDC to male connector (Default setting)  
Connect 9 VDC to DSR  
Connect pin 9 of male and female connectors  
Connect 9 VDC to RTS  
9
 
 
Dear Valued Customer,  
Thank you for purchasing Patton Electronics products! We do appreciate  
your business. I trust that you find this user manual helpful.  
We manufacture one of the widest selections of data communications  
products in the world including CSU/DSU's, network termination units,  
powered and self-powered short range modems, fiber optic modems,  
interface converters, baluns, electronic data switches, data-line surge  
protectors, multiplexers, transceivers, hubs, print servers and much  
more. We produce these products at our Gaithersburg, MD, USA, facility,  
and can custom manufacture products for your unique needs.  
We would like to hear from you. Please contact us in any of the following  
ways to tell us how you like this product and how we can meet your prod-  
uct needs today and in the future.  
Web:  
Sales E-mail:  
Support E-mail:  
Phone - Sales  
Phone - Support  
Fax:  
(301) 975-1000  
(301) 975-1007  
(301) 869-9293  
Mail:  
Patton Electronics Company  
7622 Rickenbacker Drive  
Gaithersburg, MD 20879 USA  
We are committed to a quality product at a quality price. Patton Electron-  
ics is BABT and ISO 9001 certified. We meet and exceed the highest  
standards in the industry (CE, UL, etc.).  
It is our business to serve you. If you are not satisfied with any aspect of  
this product or the service provided from Patton Electronics or its distrib-  
utors, please let us know.  
Thank you.  
Burton A.Patton  
Vice President  
P.S. Please tell us where you purchased this product:  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
10  
 
Notes  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
Copyright © 1997–2003  
Patton Electronics Company  
All Rights Reserved.  
11  
 

Murphy Switch EVS S User Manual
Murray Lawn Mower 425620x92B User Manual
NEC IP Phone 4 User Manual
OK International Water Dispenser TS250 User Manual
Omega Thermostat CN3440 User Manual
Omega Vehicle Security Power Supply IP210 User Manual
Optimus Stereo System 13 1288 User Manual
Oreck Vacuum Cleaner U3640RH User Manual
Panasonic Camera Lens LX025 User Manual
Panasonic Telephone KX TA616 User Manual