Omega Vehicle Security Camcorder HHB400 User Manual

Users Guide  
Shop online at  
omega.com  
For latest product manuals:  
omegamanual.info  
MADE IN TAIWAN  
HHB400  
Wireless Video Inspection System  
 
CONTENTS  
Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3  
Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Product Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Tool Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Description for Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Operation Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Connecting the Display Unit to the Camera . . . . . . . . . 7  
Head and Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Accessories Installation . . . . . . . . . . . . . . . . . . . . . . 7  
Connect the Grip Handle to the Monitor . . . . . . . . . 7  
Install Micro SD Card . . . . . . . . . . . . . . . . . . . . . . . . 8  
U-disk Function- attache to computer . . . . . . . . . . . 8  
Video Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
How to Work. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
How to operate the grip . . . . . . . . . . . . . . . . . . . . . . . 8  
How to view the screen. . . . . . . . . . . . . . . . . . . . . . . . 9  
How to set the screen Menu. . . . . . . . . . . . . . . . . . . . 9  
Description for Keys . . . . . . . . . . . . . . . . . . . . . . 10, 11  
Operation Precautions . . . . . . . . . . . . . . . . . . . . . . . . 11, 12  
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 16  
i
 
WELCOME  
Thank you for purchasing a HHB400 Wireless Data logging  
Manual  
Video Inspection Camera Scope. Please read this User’s  
carefully before using this product.  
The product is designed as a remote inspection device. It can be  
used to look into tight or inaccessible areas and wirelessly trans-  
mit real time video or still images for monitoring or recording.  
Typical applications may include HVAC inspection, automotive  
inspection, cable routing, automotive/boat/aircraft inspection,  
etc.  
OVERVIEW  
The HHB400 Wireless Video Inspection System  
HHB400 Camera Scope with removable display comes with,  
12mm Diameter, 3.28 ft. (1m) Obedient Probe, 2GB Micro SD card,  
3 Extension Tools: (Mirror, Magnet, Pick-Up Hook), USB and Video  
interconnect Cables, Li-ion rechargeable batteries with Charger,  
Hard Blow Mold Case and Instruction Manual. It is suitable for  
HVAC/R, plumbing and general inspection  
The system has a high clarity color LCD of 3.5" in size. The camera  
head and adjustable LED lights are imbedded in the probe tip.  
Three accessories can be attached to the probe tip for various  
applications: the magnetic tip is used to pick up small metal  
objects; the mirror tip is used to view 90° angle; the hook is used  
to grab onto objects.  
HHB400 Series’ wireless function allows user to detach the LCD  
from the handle and view findings remotely up to 32 ft away. The  
system operates on a built-in rechargeable lithium polymer battery.  
It interfaces with external displays such as computer, TV and LCD  
panel via USB, SD card and AV cable.  
1
 
FEATURES  
• 12mm diameter probe, 3.28 ft. (1m) long, flexible obedient and  
waterproof to IP67 standards  
• Optional probe extensions are available to extend probe length up  
to 16 ft. (5m)  
• 3.5 in. (88.9mm) (Screen Diagonal) TFT-LCD Wireless Color Moni-  
tor can be detached from the unit for remote viewing up to 32 ft.  
(10m) away  
• Both monitor and handle use Li-ion rechargeable batteries.  
System comes complete with batteries and charger.  
Two LED lights inside the tip of the probe illuminate dark spaces  
for clear inspection  
• Built-in magnets on back of monitor facilitate hands-free operation  
• View results in real time or data log and record in still photo  
(JPEG) or (AVI) video  
• NTSC or PAL compatible USB and AV Out interfaces  
• Three languages menu includes English, Spanish and French  
• (x3.2) zoom feature  
• 180° image rotation feature on still images  
SAFETY INSTRUCTIONS  
Failure to follow the instructions listed below may result in electric  
shock or personal injury.  
• Read and understand all instructions prior to any operation.  
• Do not remove any labels from the product.  
• Work in a well lit area as dark areas may cause accidents.  
• Do not operate the product in the presence of flammable/  
explosive gases.  
• Do not use the product around corrosive chemicals which can  
damage sensitive tips.  
• Keep bystanders, children and visitors away while operating the  
product.  
2
 
• Stay alert, watch what you are doing and use common sense. A  
moment of interruption can result in serious personal injury.  
• Do not over-reach. Keep proper footing and balance at all times.  
• Always wear eye protective gear. Dust mask, non-skid safety  
shoes, hard hat or hearing protection must be used for appropri-  
ate conditions.  
• Do not place the product on any unstable cart or surface. The  
product may fall causing serious injury to a person or serious  
damage to the product.  
• Never spill liquid of any kind on the video display units. Liquid in-  
creases the risk of electrical shock and damage to the product.  
• Do not use the device for personal or medical use.  
• The units are not shock-resistant. Do not drop it.  
BATTERY PRECAUTIONS  
• Please use the enclosed factory power adapter, otherwise you  
may damage the instrument.  
• Completely exhaust the power for the first time. We recommend  
full charging and full discharging for the first few times. The  
charging time should not be less than 12 hours for the first few  
usages. A fully activated battery will offer maximum capacity of  
the built-in batteries.  
• The charging and discharging time differs based on the current  
consumption of the units’ components.  
• Always keep the charging connector away from the metal and  
oily objects.  
• Fully charge the battery to make sure it has high performance.  
• Don’t compress and puncture the battery inside.  
“Li-ion” Rechargeable battery inside! Please do not open battery  
compartment in the handle unless battery replacement is necessary.  
• Don’t throw the product into fire, this may cause an explosion.  
• Dispose the battery properly. High temperature will cause the  
battery to explode. Some countries have regulations concerning  
battery disposal.  
Please follow all applicable regulations.  
3
 
PRODUCT COMPONENTS  
Fig. 1  
Fig. 3  
10  
11  
Fig. 4  
1Camera head and Probe  
2The grip  
3LCD Screen  
4Magnetic tip  
5Hook tip  
6Mirror tip  
7DC adapter  
8One-into-two cable  
9Micro SD memory card  
10TV cable  
11USB cable  
4
 
TOOL COMPONENTS  
Grip Handle  
ACamera protection cover  
(Remove cover before use)  
BCamera head  
CProbe  
DProbe connector  
EPower indicator——Green  
lights means normal power;  
Red light means low battery.  
FSwitch / Wheel button to  
Fig. 5  
adjust the LED brightness  
GCharging light indicator  
HCharging interface  
Monitor  
I.  
JLocking buckle clip  
KSignal connector slot  
LCharging light indicator  
MCharging interface  
NMicro SD socket  
OUSB interface  
PVideo Out  
Q.  
Fig. 6  
R.  
S
T.  
U.  
VLCD screen  
WBase stand  
5
 
DESCRIPTION FOR KEYS  
Keys  
View mode  
Playback mode  
Menu set  
Switch into playback  
mode; Hold for 3s to  
turn off the unit.  
Switch into view  
mode; Hold for 3s  
to turn off the unit.  
Hold for 3s to turn  
off the unit.  
Switch into menu set.  
Switch into current  
file operation, delete date and time  
single all format the  
Set functions set  
memory card, etc.  
Take a photo  
Take a video  
Image rotation  
Show the last photo Moving to left;  
or video;  
Show the next photo Moving to right  
or video;  
Play pause, resume  
the video file;  
Moving up / pro-  
gressive increase  
data and time;  
Image magnify  
Stop video file;  
View six files or six  
folders.  
Moving down /  
progressive  
decrease data  
and time;  
OPERATION INSTRUCTIONS  
• Battery Charging  
1. Connect the DC cable to the grip and/or screen.  
2. Plug the AC plugs to household power outlet.  
3. The LED G and/or L turns red means charging.  
4. The LED G and/or L turns green, means fully charged  
5. Pull out the AC plug of adapter.  
Notes: If you want to charge both the grip and screen, use the one-  
to-two cable. The single end goes to the adapter, and the  
double end goes to screen and grip.  
6
 
CONNECTING THE DISPLAY UNIT  
TO THE CAMERA  
HEAD AND PROBE:  
The display unit must be connected to  
the camera head and probe. To connect  
the probe to the display unit, make sure  
the keyed ends are properly aligned  
(See Fig. 7). Once they are aligned,  
tighten the nut.  
ACCESSORIES INSTALLATION:  
The three accessories include mirror tip,  
hook tip and magnetic tip (See Fig. 2). All  
are attached to the camera head the same  
way. Hold the camera head as shown in  
Fig. 8, slip the semicircle end of the  
accessory over the flats of the camera  
head then rotate the accessory 90° to  
fix it in place as shown in Fig. 9.  
• Connect the grip handle to Monitor  
The product can work with the grip detached  
from screen and the grip attached with  
screen; Slide the slot at the back screen into  
the slot of grip in the left direction until you  
hear the locking sound, which means con-  
nection is accomplished. Press the lock  
buckle clip and slide to the right direction to  
detach the screen (FIG.10).  
Note: The wireless function is off while the  
product is attached to the screen on the grip, which will en-  
sure that the image quality does not suffer from outside inter-  
ference.  
7
 
• Install Micro SD card  
When the SD card is inserted correctly,  
icon will show on the  
screen; Otherwise  
icon will show.  
• U-disk function- attach to computer  
The USB interface on the screen can be connected to a computer.  
When inserting the memory card, it can be considered as a U-disk;  
When connecting the USB2.0 cable to computer and turning the  
power on, the LCD displays “MSDC” , now the screen can be used  
as U-disk.  
• Video output  
If you want to view image from television, please connect the VIDEO  
OUT of screen to VIDEO IN of television by video out cable, now the  
screen is off.  
• How to work  
1. How to operate the grip:  
a. Roll the button on the grip towards the probe direction to  
power on.  
b. Continue to roll the button to adjust the brightness of the  
camera LEDS (FIG.11).  
8
 
2. How to view the screen  
a. Insert the Micro SD to memory card slot correctly.  
b. Press  
to enter view mode, the screen automatically find  
the image signal. When the same receiving and transmission  
frequency occurs, it is time to view image.The default chan-  
nel is CH12414MHZ)。  
c. Press  
to take a photo (but if no card is inserted, the key  
will not function), the files will be stored in memory card itself.  
d. Press  
to start record image (but if no card is inserted, the  
key will not function), red icon will show on the up edge of the  
screen, the files with be stored in memory card itself.  
e. Press  
to rotate image, every press rotates 180°.  
to zoom from 1 to 3.2 times with corresponding  
f. Press  
numbers indicating zoom size.  
g. Press  
h. Press  
i. Hold  
to enter menu set.  
to enter playback mode.  
for 3s to turn off the product.  
Note: The screen turns off itself if not in use for 3 minutes.  
Tips: When the system is working (especially in video mode),  
ejecting SD card will damage the stored files or damage  
SD card, please make sure the system is off before removing  
SD card.  
3. How to set screen Menu  
a. In View status, press MENU to set menu.  
b. Select the menu by pressing the four direction keys.  
c. Press MENU to confirm the selection.  
d. Press EXIT back to the last menu until you are View mode.  
e. The following table shows screen setting menu.  
9
 
DESCRIPTION FOR KEYS  
Function Menu Selection  
Menu  
Selection Parameter  
Tuner Channel  
Photo Quality  
CH1; CH2; CH3; CH4; EXIT  
High Quality; Standard Quality; Low Quality; EXIT  
QVGA; D1; EXIT  
Movie Quality  
Advanced  
TV Output Standard  
Setting  
NTSC; PAL; EXIT  
EXIT  
Auto Capture  
ON; OFF; EXIT  
Master Capture  
File OverWrite Setting  
EXIT  
Photo 1; Photo 3; Movie 5s; Movie 10s; EXIT  
ON; OFF; EXIT  
Auto  
Capture  
Set Time/Date  
Photo TimeStamp  
Movie TimeStamp  
Resume to factory  
default  
YY/MM/DD  
On; Off; EXIT  
On; Off; EXIT  
Yes; No  
Set Time/  
Date  
EXIT  
4. How to operate Playback mode (No selection is available if there  
is no memory card.)  
a. Press  
to display stored six images, press again to display  
different folders.  
b. Press  
to scan files or folders.  
c. Press  
or  
to view the last or next image.  
to play video, press again to pause.  
Pressing once more will resume video. Press to stop playing.  
e. Press to play files, press direction keys to select delete  
single all files or format the memory card.  
f. Select EXIT to return to last menu until playback mode.  
g. Press to return to view mode.  
d. If it is video file, press  
10  
 
5. This product is designed for inspection of hard-to reach areas.  
Typical applications include HVAC inspection, car inspection,  
circuitry, vessel and aircraft.  
OPERATION PRECAUTIONS!  
1. Please read all the safety instructions carefully.  
2. The probe is flexible to help you operate in hard-to-reach areas.  
Please don’t insert or bend by force. Please do not over bend any  
part of the probe. Normally, the bending radius should not be less  
than 2" (50mm) to prevent from permanent damage to the probe.  
3. Don’t use the probe or camera head to modify surroundings,  
clear pathways or clogged areas.  
4. The hand-held display unit is not waterproof. The camera head  
and its cover are waterproof, but not acid-proof or fire-proof. Do  
not touch these materials or they will ruin the camera head’s pro-  
tective plastic. Avoid submersing the camera head into corrosive,  
oily places or high temperature objects.  
5. Don’t place the cameral head or probe into anything or anywhere  
that may contain a live electrical charge.  
Please check following methods to avoid injury.  
For walls: For inspecting the inside of walls, be sure to shut off the  
circuit breaker to the whole house before  
using the tool.  
For pipes: If you suspect a metal pipe could contain an electrical  
charge, have a qualified electrician check the pipe before using this  
product. A ground circuit, in some cases, can be returned to the  
cast aluminum pipes and cause them to be charged.  
For automobiles: Be sure the automobile is not running during  
inspection. Metal and liquid under the hood may  
be hot. Don’t get oil or gas on the camera head.  
• Please do not operate this product unless the manual has been  
read thoroughly and proper training has been completed.  
11  
 
• The red LED will light when the handle has a low battery;  
The “  
” will show up on the screen if the monitor has a low  
battery.  
• Do not immerse the handheld display unit in water which will re-  
sult in electric shock and damages.  
• The camera head is water-proof, but the handheld display is not  
water-proof.  
• Do not use the product if condensation forms inside the camera  
head.  
• If the tool does not work well after turning it on. Please take the  
batteries out and do not use. Please have the unit checked by a  
qualified technician.  
• Store idle products out of reach of children and other untrained  
personnel. The product is dangerous in the hands of untrained  
users.  
• Maintain the inspection product with care. If the product is  
dropped, check for the breakage which may affect its operation. If  
it is damaged, have the product serviced before using. Many acci-  
dents are caused by poorly maintained products.  
• Use only accessories that are recommended by the manufacturer  
for your product. Accessories are suitable for the product, but  
may become hazardous when used on another product.  
• Should the unit freeze up, press reset button or power off to reset.  
• Dry your hands before turning the tool ON or OFF.  
• Protect against excessive heat. The product should be kept away  
from heat sources, such as radiators heat registers stoves or other  
products (including amplifiers) that produce heat. Don’t use the  
tool near moving machinery or areas where the temperature ex-  
ceeds 113F (45C).  
• Please cover the camera tip with protective cap while not in use.  
• Store the product in ventilated and dry places.  
12  
 
TROUBLE SHOOTING  
Problems  
Causes  
Solutions  
Adapter didn’t make a  
good connection with  
product.  
The connector or cable  
is broken.  
Please check and try again.  
Will not  
charge  
Replace and try again.  
Dead battery  
Ask a technician to replace the battery.  
Set the same channel.  
1. Different channel  
set between the grip  
and screen.  
The screen is  
on but without  
image or shows  
“No Signal”  
2. The probe is loose. Check and connect again.  
3. Stains on the cam- Check if stains exist.  
era head.  
LEDs on the  
camera head  
are dim at max  
brightness, dis-  
play changes  
from black to  
white, color  
Low battery  
Use adapter for charging.  
display turns  
itself off after  
a period.  
The circuit is in  
protection status.  
Press reset or use adapter for charging  
to release.  
The product  
won’t turn on.  
Low battery  
Dead battery  
Use adapter for charging  
Ask a technician to replace the battery.  
Interference to the  
screen or voltage  
fluctuation.  
Please use the reset button  
inside the hole below the  
stand base.  
Abnormal  
display or  
invalid keys.  
13  
 
FCC INFORMATION  
This device complies with part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device may not  
cause harmful interference. (2) this device must accept any interfer-  
ence received, including interference that may cause undesired op-  
eration. Changes or modifications not expressly approved by the  
party responsible for compliance could void the user’ s authority to  
operate the equipment.  
CAUTIONS!  
• The apparatus shall not be exposed to dripping or splashing and  
that no objects filled with liquids, such as vases, shall be placed  
on the apparatus. Do not expose instrument to moisture.  
• Don’t drop the instrument or use by force.  
• Don’t disassemble the instrument to avoid failure.  
• Please do not open battery compartment in the handle unless  
battery replacement is necessary.  
• Don’t place the instrument with corrosive gas or objects.  
• Don’t expose the instrument in environment which is with shock,  
too high or too low temperatures.  
• Store the instrument in a safe area.  
• Don’t immerse the instrument into water which can cause dam-  
ages to the product.  
Turn off the Camera/Monitor if the system is not in use.  
• The adapter is used as the disconnect device from the mains.  
The adapter shall remain readily operable.  
• The Camera/Monitor can only be completely disconnected from  
the mains by unplugging the adapter.  
• Do not cut the DC power cable of the apparatus to fit with another  
power source.  
• Attention should be paid to the disposal of batteries in environ-  
mentally- friendly ways.  
• Charge the batteries every three months if not being used for a  
long period of time  
14  
 
SPECIFICATIONS:  
CAMERA HANDLE/PROBE  
Transmission Range: Up to 32 ft. (10m), clear range without obstacle  
Transmission Frequency: 2414Mhz,  
Resolution: 320 x 240 Pixels  
Lighting Source: White LED  
Focal Length: 1.97 in (50mm)  
Field of View: 60°  
Depth of Field (DOF): 1.2" – 3.94" (30mm – 100mm)  
Camera Tipped Probe: 0.47" (12mm) Diameter Standard  
Probe Length: 3.28 ft. (1m) Standard  
Water proof capacity: IP67, only for obedient probe and camera  
head  
Power Source: 3.7 V “Li-ion” rechargeable battery pack (included);  
DC5.5V  
Power Adapter: Input: AC 100 – 240 V, 50 – 60 Hz; Output: 5.5V, 1.5A  
Dimensions: 8.5" x 6.9" x 1.9" (215 x 175 x 50mm)  
Weight: 8 oz. (228g)  
PROBE OPTIONS:  
• 3.28 ft. (1m) and 6.56 ft. (2m) long 12mm Diameter Probe  
Extensions -Total Length: Up to 16 ft. (5m)  
• 3.28 ft. (1m) long 9.0mm Diameter Camera Tipped Probe  
MONITOR  
Display: 3.5 in. (88.9mm) (Screen Diagonal) Color TFT LCD Screen  
Receiving Frequency: 4 channels, 2414MHz, 2432MHz, 2450MHz,  
2468MHz  
Resolution: 320 x 240 Pixels  
Power Source: 3.7 V “Li-ion” rechargeable battery pack (included);  
DC5.5V  
15  
 
Power Adapter: Input: AC 100 – 240 V, 50 – 60 Hz; Output: 5.5V 1.5A  
Image Resolution: 320 x 240 Pixels  
Video Resolution: QVGA/D1  
Image storage media: Micro SD cardUp to 16G)  
Dimensions: 3.9 x 3.2 x 1 in. (100 x 82 x 26mm)  
Weight: 6.2 oz. (175g)  
Operating Temperature: 32 to 113°F (0 to 45°C)  
5 to 95%RH non-condensing  
Storage Temperature: (-20 to 60°C) <85%RH  
Adapter: Input-100 to 240VAC Output: 5.5V 1.5A  
Charging Time: About 3.5 Hours  
Battery Life: About 2 Hours  
EU Environmental Protection Waste electrical products should not  
be disposed of with household waste.  
Please recycle where facilities exist.  
Check with your Local Authority or retailer for recycling advice.  
16  
 
NOTES:  
17  
 
NOTES:  
18  
 
NOTES:  
19  
 
WARRANTY/ DISCLAIMER  
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a  
period of 13 months from date of purchase. OMEGA’s Warranty adds an additional one (1) month grace  
period to the normal one (1) year product warranty to cover handling and shipping time. This  
ensures that OMEGA’s customers receive maximum coverage on each product.  
If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service  
Department will issue an Authorized Return (AR) number immediately upon phone or written request.  
Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no  
charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser,  
including but not limited to mishandling, improper interfacing, operation outside of design limits,  
improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of  
having been tampered with or shows evidence of having been damaged as a result of excessive corro-  
sion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other  
operating conditions outside of OMEGA’s control. Components in which wear is not warranted, include  
but are not limited to contact points, fuses, and triacs.  
OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA  
neither assumes responsibility for any omissions or errors nor assumes liability for any  
damages that result from the use of its products in accordance with information provided by  
OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the  
company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES  
OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT  
THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF  
MERCHANTABILITY AND FITNESS FOR  
A
PARTICULAR PURPOSE ARE HEREBY  
DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are  
exclusive, and the total liability of OMEGA with respect to this order, whether based on  
contract, warranty, negligence, indemnification, strict liability or otherwise, shall not  
exceed the purchase price of the component upon which liability is based. In no event shall  
OMEGA be liable for consequential, incidental or special damages.  
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic  
Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical  
applications or used on humans. Should any Product(s) be used in or with any nuclear installation or  
activity, medical application, used on humans, or misused in any way, OMEGA assumes no  
responsibility as set forth in our basic WARRANTY/ DISCLAIMER language, and, additionally, purchaser  
will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out  
of the use of the Product(s) in such a manner.  
RETURN REQUESTS/ INQUIRIES  
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE  
RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN  
(AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESS-  
ING DELAYS). The assigned AR number should then be marked on the outside of the return package and  
on any correspondence. The purchaser is responsible for shipping charges, freight, insurance and proper pack-  
aging to prevent breakage in transit.  
FOR NON-WARRANTY REPAIRS, consult OMEGA  
for current repair charges. Have the following  
information available BEFORE contacting OMEGA:  
1. Purchase Order number to cover the COST  
of the repair,  
2. Model and serial number of the product, and  
3. Repair instructions and/or specific problems  
relative to the product.  
FOR WARRANTY RETURNS, please have the  
following information available BEFORE contacting  
OMEGA:  
1. Purchase Order number under which the  
product was PURCHASED,  
2. Model and serial number of the product under  
warranty, and  
3. Repair instructions and/or specific problems  
relative to the product.  
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our cus-  
tomers the latest in technology and engineering.  
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.  
© Copyright 2010 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced,  
translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of  
OMEGA ENGINEERING, INC.  
 
Where Do I Find Everything I Need for  
Process Measurement and Control?  
OMEGA…Of Course!  
Shop online at omega.comsm  
TEMPERATURE  
DATA ACQUISITION  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Thermocouple, RTD & Thermistor  
Probes, Connectors, Panels &  
Assemblies  
Wire: Thermocouple, RTD & Thermistor  
Calibrators & Ice Point References  
Recorders, Controllers & Process  
Monitors  
Data Acquisition & Engineering  
Software  
Communications-Based Acquisition  
Systems  
ߜ
 
ߜ
 
ߜ
 
Plug-in Cards for Apple, IBM &  
Compatibles  
ߜ
 
ߜ
 
Data Logging Systems  
Recorders, Printers & Plotters  
ߜ
 
Infrared Pyrometers  
PRESSURE, STRAIN AND FORCE  
HEATERS  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Transducers & Strain Gages  
Load Cells & Pressure Gages  
Displacement Transducers  
Instrumentation & Accessories  
Heating Cable  
Cartridge & Strip Heaters  
Immersion & Band Heaters  
Flexible Heaters  
Laboratory Heaters  
FLOW/LEVEL  
ߜ
 
Rotameters, Gas Mass Flowmeters &  
Flow Computers  
ENVIRONMENTAL  
MONITORING AND CONTROL  
ߜ
 
ߜ
 
ߜ
 
Air Velocity Indicators  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Metering & Control Instrumentation  
Refractometers  
Turbine/Paddlewheel Systems  
Totalizers & Batch Controllers  
Pumps & Tubing  
Air, Soil & Water Monitors  
Industrial Water & Wastewater  
Treatment  
pH, Conductivity & Dissolved Oxygen  
Instruments  
pH/CONDUCTIVITY  
ߜ
 
ߜ
 
ߜ
 
pH Electrodes, Testers & Accessories  
Benchtop/Laboratory Meters  
Controllers, Calibrators, Simulators &  
Pumps  
Industrial pH & Conductivity  
Equipment  
ߜ
 
ߜ
 
M4842/0810  
 

MTD Trimmer 243 540 User Manual
NordicTrack Treadmill 307020 User Manual
Omron Thermometer Gentle Temp 520 User Manual
Onkyo Stereo Receiver TX NR616 User Manual
Optiview Security Camera VPTZ User Manual
Ositech comm Network Card 614006 001 User Manual
Panasonic Drill EY6930 User Manual
Panasonic DVR DMR EH59 User Manual
Panasonic Radio CQ JV1060L User Manual
Panasonic Ventilation Hood FBA11J10M User Manual