Numark Industries DJ Equipment WS User Manual

®
Professional Disc Jockey Products  
VHF High Frequency Wireless Microphone & Receiver Units  
10. After microphone is turned on, the signal indicating  
Features:  
light of receiver will come on indicating that the  
signal from the microphone has been received.  
11. Rotate the volume knob on the receiver to the  
desired volume to use the Microphone.  
12. Adjust output volume of the hand free transmitter to obtain  
good sound without distortion.  
This product is a professionally designed wireless  
microphone and receiver system that can be operated in  
conjunction with DJ, Singer, Karaoke or Public Speaker.  
A quartz crystal oscillator is used for the circuits of this  
product thus making the frequency stable without shifting  
and receiving outward interference.  
Models are available for either handheld, headset, or  
lavaliere microphone options  
Please record the serial number of your unit as well as the  
name of the dealer from whom you purchased the unit. Retain  
this information with your receipt for your records. Please  
return the warranty card enclosed to register your microphone  
with us.  
Equipment options:  
WS-31 series: This system consists of a rack mountable, table  
top high frequency one channel non-diversity receiver, one  
wireless microphone, one 1/4” - 1/4” mic cable, and power  
supply for the receiver.  
MODEL: WS-  
SERIAL NUMBER:  
PURCHASED FROM:  
DATE OF PURCHASE:  
WS-32 series: This system consists of a rack mountable, table  
top high frequency two channel non-diversity receiver, two  
wireless microphones, one 1/4” - 1/4” mic cable, and a power  
supply for the receiver.  
Precautions:  
WS-33 series: This system consists of a rack mountable, table  
top high frequency one channel true-diversity receiver, one  
wireless microphone, one 1/4” - 1/4” mic cable, and power  
supply for the receiver.  
A. Load the battery in accordance with the drawing attached to the  
battery compartment in the microphone.  
B. If the microphone is not in use, please turn off the switch of the  
microphone and remove the battery. Also turn off the receiver,  
and unplug it.  
C. After the microphone has been used for a period of time, the  
indicating light at the bottom of the microphone will come on  
indicating that the battery has been exhausted and change of  
battery is necessary.  
D. For operation, always turn on the power for the receiver first,  
then turn on the power for the microphone, and then bring up  
the level on your mixing console. After operation, bring down the  
level on your mixer then turn off the power for the microphone  
and turn off the power for the receiver.  
E. As this system has been subjected to precision calibration prior  
to factory delivery, do not open for adjustment, as this will void  
the warranty. Please return to an authorized Numark repair site  
for all necessary repairs.  
WS-RK Rack mount kit: Available separately, this 1 space  
rack mount kit allows 2 receivers to be mounted next to each  
other.  
Operating Instruction:  
1. Remove receiver from packaging.  
2. Attach receiver to (WS-RK) rack mount kit if desired,  
available separately.  
3. Extend antennae for reception  
4. With the unit off, hook up the power supply to the  
receiver of this system and plug it into an  
appropriate outlet.  
5. Hook up the microphone cable from the output of the  
receiver to the microphone input on your mixer or  
recording device.  
6. Turn the switch ON and the power indicating light  
will come on indicating that power is on.  
7. Install the battery(s) in the transmitter. For handheld  
microphones, turn and open the base section of  
microphone and load in 9V battery. For the hands  
free models open the transmitter battery door and  
install battery(s).  
8. For hands free models, plug in microphone into the  
jack on the top of the transmitter.  
9. Turn on the switch of microphone and the indicating  
light will flash once indicating that the microphone is  
turned ON. If the battery indication light is on this  
means the battery needs to be replaced.  
Specifications:  
RECEIVERS:  
CARRIER FREQUENCY: 170 – 210 MHz VHF BAND  
CHANNEL: WS-31 SINGLE CHANNEL NON-DIVERSITY  
WS-32 DUAL CHANNEL NON-DIVERSITY  
WS-33 SINGLE CHANNEL DIVERSITY  
QUIETING SENSITIVITY (S/N=30Db, THD=3%)  
S/N RATIO AT 1mV INPUT: 60 dB  
UNBALANCE OUTPUT LEVEL: -44dB (MIC) -14dB (LINE)  
BALANCE OUTPUT LEVEL (WS-33only): -44dB (MIC) -14dB (LINE)  
THD(1KHz, 10KHzDEV, 1Mv): 0.5%  
FREQUENCY DRIFT: +/- 50KHz  
POWER REQUIREMENT: DC12V/200mA  
 

Miele Cooktop KM 6310 User Manual
NETGEAR Switch 724TS User Manual
Nextar Digital Photo Frame N7 110 User Manual
Night Owl Optics DVR LION 4250 User Manual
Onkyo CD Player DV CP701 User Manual
Oregon Scientific Clock BAR888RA User Manual
Panamax Surge Protector In Wall Home Theater Power Management User Manual
Panasonic Camera Flash DMC TZ35 User Manual
Panasonic DVD Player DVD F86 User Manual
Panasonic Telephone KXTG9381T User Manual